Kia Sorento 2022 Manual page 298

Features of your vehicle
The front view camera is used as a
detecting sensor to detect ambient
light and brightness whilst driving.
Refer to the picture above for the
detailed location of the detecting
sensor.
NOTICE
Always keep the front view cam-
era in good condition to maintain
optimal performance of High
Beam Assist.
For more details on the precau-
tions of the front view camera,
refer to"Forward Collision-Avoid-
ance Assist (FCA) (Front view
camera only) (if equipped)" on
page 6-65.
Function setting
With the ENGINE START/STOP but-
ton in the ON position, select 'Lights
→ High Beam Assist (or HBA (High
Beam Assist))' from the Settings
menu to turn on High Beam Assist
function.
WARNING
For your safety, change the Set-
tings after parking the vehicle at a
safe location.
5 144
Function operation
After selecting 'High Beam Assist'
in the Settings menu, High Beam
Assist will operate by following
the procedure below.
- Place the headlamp switch in
the AUTO position and push the
headlamp lever towards the
instrument cluster. The High
Beam Assist (
will illuminate on the cluster
and the system will be enabled.
- When the system is enabled,
high beam will turn on when
vehicle speed is above 40 km/h
(25 mph). When vehicle speed is
below 25 km/h (15 mph), high
beam will not turn on.
- The High Beam (
light will illuminate on the clus-
ter when high beam is on.
When High Beam Assist is operat-
ing, if the headlamp lever or
switch is used, the function oper-
ates as follow:
- If the headlamp lever is pulled
towards you when the high
beam is off, the high beam will
turn on without High Beam
Assist cancelled. When your
hand is off the lever, it will
move to the middle and the
high beam will turn off.
- If you push the light switch
towards the instrument cluster,
high beam is turned on and High
Beam Assist is released.
Lighting
) indicator light
) indicator