僅 Replacing Side Repeater Lamp (Led Type); 僅 Replacing Stop And Taillamp (Bulb Type) - Kia Sorento 2023 Owner's Manual

Hide thumbs Also See for Sorento 2023:

Table of Contents

Replacing side repeater lamp

If the Side repeater lamp (LED) (1) does

not operate, have your vehicle checked

by a professional workshop.

Contact and visit an authorized Kia

The LED lamp cannot be replaced as a

single unit because it is an integrated

unit. The LED lamp has to be replaced

with the unit.

A skilled technician should check or

repair the Side repeater lamp (LED), for

it may damage related parts of the vehi-

Replacing stop and taillamp (Bulb

1. Turn off vehicle and disconnect the

negative terminal from the battery.

2. Open the liftgate.

3. Open the service cover.

4. Loosen the light assembly retaining

screws with a cross-tip screw driver.

5. Remove the rear combination lamp

assembly from the body of the vehi-

6. Disconnect the rear combination lamp

7. Remove the socket from the assembly

by turning the socket counterclock-

wise until the tabs on the socket align

with the slots on the assembly.

8. Remove the bulb from the socket by

pressing it in and rotating it counter-

clockwise until the tabs on the bulb

align with the slots in the socket.

Chapters

Table of Contents