Table of Contents
Advertisement
Driving your vehicle
WARNING
Misuse of Cruise Control
Do not use cruise control if the traf-
fic situation does not allow you to
drive safely at a constant speed and
with sufficient distance to the vehi-
cle in front.
Cruise Control Operation
Setting speed
1. Accelerate to the desired speed,
which must be more than 30 km/
h (20 mph).
OMQ4051128L
2. Press the Driving Assist (
button at the desired speed. The
set speed and Cruise (
indicator will illuminate on the
cluster.
3. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator
pedal is not depressed.
NOTICE
On a steep slope, the vehicle may
slightly slow down or speed up
whilst driving uphill or downhill.
Increasing speed
Push the + switch up and release
it immediately. The cruising speed
will increase by 1 km/h (1 mph)
each time the switch is operated
in this manner.
Push the + switch up and hold it
whilst monitoring the set speed
on the cluster. The cruising speed
will increase to the nearest multi-
)
ple of ten at first, and then
increase by 10 km/h (5 mph) each
)
time the switch is operated in this
manner.
Release the switch when the
desired speed is shown and the
vehicle will accelerate to that
speed.
Cruise Control (CC)
OMQ4051324L
6
6
143
Advertisement
Chapters
Table of Contents
