HP ProCurve Switch 212M Management And Configuration Manual page 101

IP Multicast (IGMP) Service Features—Multimedia Traffic Control
To Access IGMP Service:
Use this procedure to configure or edit the IGMP settings for the switch.
1. From the Main Menu, select:
3. Switch Configuration
5. Advanced Features
1. IP Multicast (IGMP) Service
Figure 6-18. Example of the IGMP Service Screen
Press [E] (for Edit) to highlight the IGMP Enabled parameter
2.
3. Press the Space bar to select Yes (to enable IGMP).
Use [v] to highlight the Forward with High Priority parameter.
4.
5. If you want IGMP traffic to be forwarded with a higher priority than other
traffic on the switch, use the Space bar to select Yes. Otherwise, leave this
parameter set to No.
Use [v] to highlight the IP Mcast parameter setting for a port you want to
6.
reconfigure. (The options are: Auto, Blocked, and Forward. Refer to the
online Help for further information on these choices.)
7. Repeat step 6 for each port you want to configure.
Configuring the Switch
6-37