Using The Command Prompt - HP ProCurve Switch 212M Management And Configuration Manual

Using the Command Prompt

In addition to the menu-based part of the switch console, under the Diagnos-
tics Menu, a command-line based interface is available. The commands are
primarily for the expert user and for diagnostics purposes. Selecting Command
Prompt from the Diagnostics Menu presents a command prompt from which
you can enter the following commands:
List of Commands Available at the Command Prompt
Help Delete
Exit History
Browse Kill
Config Get
Date Put
Time LinkTest
To get a definition of these commands and their syntax, enter Help at the
command prompt. When you see -- MORE -- at the bottom of the screen:
To advance the display one line at a time, use [Enter].
To advance the display one screen at a time, use the Space bar.
If you want to stop the help listing, press [Q].
How To Use the Command Prompt:
To access the command prompt, select 5. Diagnostics ... in the Main Menu,
1.
then select 4. Command Prompt from the Diagnostics Menu.
2. The command prompt appears near the bottom of the screen. The text in
the prompt matches the System Name parameter. For example, in the
factory default configuration (no system name configured), the command
prompt is DEFAULT_CONFIG:
3. Type in the command you want to execute and press [Enter]. For example,
to set the time to 9:55 a.m. you would execute the following command:
DEFAULT_CONFIG: time 9:55 [Enter]
How To Exit from the command prompt:
Type exit and press [Enter] to return to the Diagnostics Menu.
Log SetMIB
Page Version
Ping WalkMIB
Print Xget
Redo Xput
GetMIB romversion
Troubleshooting
Diagnostics
8-15