Configuration Features - HP ProCurve Switch 212M Management And Configuration Manual

Configuring the Switch
Overview

Configuration Features

The following table lists the configuration features available for the switch.
Table 6-1.
Feature
Time Protocol
IP Configuration
SNMP Communities
Trap Receivers and
Authentication Traps
Console/Serial Link:
• Inbound Telnet
• Web Agent Enabled
• Terminal Settings
Operator and Manager Usernames
Operator and Manager Passwords
System Information
Address Age Interval
System Time
Port Settings
Network Monitoring Port
Spanning Tree Enable/Disable
Spanning Tree Parameters
IGMP Enable/Disable
Support/Management URLs
N o t e :
In the factory default configuration, the Spanning Tree Protocol (STP—which
automatically blocks redundant links) is disabled. Generally, you should
enable STP to prevent broadcast storms if there are redundant links in your
network. For more information, refer to "Spanning Tree Protocol" on page
page 6-30.
6-2
Configurable Feature Comparison
Switch
Console
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Web Page
Browser
Interface
— page 6-8
Yes page 6-5
— page 6-15
— page 6-18
page 6-20
—
—
—
Yes page 3-8
Yes page 4-10,
page 3-8
Yes page 6-22
—
—
Yes page 6-24
Yes page 6-28
Yes page 6-30
—
Yes page 6-34
—
Yes page 6-3