Enabling Stp From The Web Browser Interface - HP ProCurve Switch 212M Management And Configuration Manual

Enabling STP from the Web Browser Interface

This procedure enables or disables STP on the switch.
1. Click Here
3. To enable or disable STP, click on the drop-down
menu, and click on your selection (On or Off).
Figure 6-14. Device Features Screen for Enabling Spanning Tree
Parameter
Spanning Tree
(Default: Off)
2. Click Here
Description
Enables or disables Spanning Tree Protocol across all ports on the
switch. Other STP parameters are available through the console
interface. Enabling or disabling STP through the web browser interface
does not affect the settings of these other parameters. For more
information on STP operation, refer to "How STP Operates" on page page
6-33.
Configuring the Switch
Spanning Tree Protocol (STP)
4. Click on Apply Changes
to activate your choice.
6-31