HP ProCurve Switch 212M Management And Configuration Manual page 107

1.
2.
3.
4.
5.
The multicast communication between the server and the clients will now
operate correctly.
N o t e
If the server is not directly connected to the switch, and the server's multicast
traffic is arriving at the switch through the querier port, the above procedure
is not necessary. The querier device will automatically be a member of the
multicast group and the multicast application traffic will be distributed prop-
erly.
If your switch, and not some other device, is acting as the querier, the above
procedure will have to be completed.
IP Multicast (IGMP) Service Features—Multimedia Traffic Control
From the console Main Menu, select:
3. Switch Configuration
5. Advanced Features
1. IP Multicast (IGMP) Service
IGMP Service configuration screen similar to figure 6-18 on page 6-37 is
displayed.
In the IGMP Service screen, press [E] (for Edit)
Use the arrow keys to highlight the IP Mcast parameter setting for the port
to which the server is connected.
Press [F] or press the Space bar until Forward appears for the parameter
value.
Press [Enter] and [S] (for Save) to activate the changes you've made to the
IGMP configuration and return to the Advanced Features menu.
Configuring the Switch
6-43