Conexio Menu - KaVo ESTETICA E70 Vision Short Instructions For Use

Hide thumbs Also See for ESTETICA E70 Vision:
Table of Contents

Advertisement

Short instructions for use 4 Operating the touchscreen
• Stopwatch (counts the time)
▶ Tap the arrow keys to set the timer time.
▶ Tap the "Save" key to save the value.
▶ Tap the "Cancel" key to quit without saving.
ð This causes the "Timer" menu to be displayed.
▶ Tap the
Retrieve timer (dentist element)
▶ Tap the "Timer" tab to display the "Timer" menu.
Timer menu
▶ Tap the "Timer" tab to retrieve the timer.
ð As soon as the timer is finished, an acoustic signal is issued.
▶ Tap the timer again to stop the timer.
Retrieve timer (assistant element)
▶ To start a timer time, e.g. Timer 1, press the "Timer 1" key.
ð Time on the timer starts to run. A beep is issued after the timer time is
elapsed.
▶ Press the selection button again to stop the timer time.

4.5 CONEXIO menu

The "CONEXIO" menu allows full access to all the critical data of a patient from a treat-
ment unit.
Requirement
The CONEXIO must be installed on a workstation computer and connected to the prac-
tice network.
The computer must be switched on and connected to the treatment unit via a network
(Ethernet).
key next to Timer to edit a timer generated previously.
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Estetica e80 vision

Table of Contents