Cleaning Programs "Morning" And "Evening; Weekly" Cleaning Program - KaVo ESTETICA E70 Vision Short Instructions For Use

Hide thumbs Also See for ESTETICA E70 Vision:
Table of Contents

Advertisement

Short instructions for use 6 Hygiene

6.5 Cleaning programs "Morning" and "Evening"

Set rinsing time
▶ Tap "Settings" to open the "Settings" menu.
▶ Then tap "General settings" followed by "Advanced settings".
▶ Scroll down until "Morning" and "Evening" are displayed.
▶ Use the slider bar to set the rinsing time for "Morning", "Evening" and "After treat-
ment".
ð The default value for the cleaning programmes "After treatment" and "Evening" is
20 seconds per instrument.
ð The default value for the "Morning" cleaning programme is 2 minutes per instru-
ment.
▶ Tap the corresponding button to start the cleaning programme "Morning" or "Even-
ing".
ð The following message is displayed after completion of the cleaning programme:
▶ After completion of the "Evening" cleaning programme, do not place hoses in holders
and switch off the treatment centre.

6.6 "Weekly" cleaning program

Run the "Weekly" cleaning programme:
• At first start-up
• Before, during and after prolonged downtimes (more than 4 weeks)
• Over the weekend
• During vacations
• After treatment of patients at high risk
▶ Tap "Weekly" to start the cleaning programme.
ð At the start of the active phase, the display of the dentist element shows the follow-
ing message and a beep can be heard.
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Estetica e80 vision

Table of Contents