KaVo ESTETICA E70 Vision Short Instructions For Use page 25

Short instructions for use 4 Operating the touchscreen
Switching COMPOsave mode ON/Off via the home screen or by
sensor
Requirement
Use the Settings menu to activate the COMPOsave mode.
▶ Press the "Dim operating light" key.
or
▶ Put your hand in front of the sensor for 2 seconds.
ð This switches the COMPOsave mode on.
ð The COMPOsave mode can be recognised by the yellow light.
▶ Press the "Dim operating light" key.
or
▶ Put your hand in front of the sensor for 2 seconds.
ð The operating light switches back to normal light mode.
Turning the laser mode On and Off
▶ Tap the "Laser" key (can be added via Settings on home screen).
ð The laser mode switches on.
ð Laser mode is activated: the operating light is on for 1 second in green
and then changes to a white light.
or
▶ Put your hand in front of the sensor for 3 sec.
ð The laser mode switches on.
ð Laser mode is activated: the operating light switches initially to COMPOsave mode
and then is on for 1 second in green and then changes to white light.
Operation of the 3D joint
▶ Turn the switching ring to the left until it snaps into place.
25