Vibration Damper And Pulley - Remove (Pulleys Without Split Lock Rings); Vibration Damper And Pulley - Remove (Pulley With Split Lock Rings) - Perkins 1106C Series Disassembly And Assembly

84
Disassembly and Assembly Section
Vibration Damper and Pulley -
Remove
(Pulleys without Split Lock
Rings)
Removal Procedure
Table 31
Required Tools
Part
Tool Number
Guide Stud
-
A
(M12 by 70 mm)
27610299
B E18 Torx socket
Start By:
a. Remove the alternator belt. Refer to Disassembly
and Assembly, "Alternator Belt - Remove and
Install".
Note: The weight of the assembly of the crankshaft
pulley, the vibration damper and the crankshaft
adapter is approximately 22 kg (48 lb). Remove the
vibration damper and the crankshaft pulley before the
crankshaft adapter is removed from the engine.
Illustration 150
1. Remove one of bolts (4). Install Tooling (A) into the
assembly of the crankshaft pulley, the vibration
damper and the crankshaft adapter.
i02654373
Part Description Qty
1
1
g01337793
2. Remove remaining bolts (4).
3. Remove vibration damper (3) and crankshaft
pulley (2) from crankshaft adapter (1). Remove
Tooling (A) from crankshaft adapter (1).
4. Use a suitable tool in order to prevent the
crankshaft from rotating. Use Tooling (B) to
remove torx screws (5).
5. Remove the crankshaft adapter (1) from the
crankshaft.
Vibration Damper and Pulley -
Remove
(Pulley with Split Lock Rings)
Removal Procedure
Table 32
Required Tools
Part
Tool Number
Guide Stud
-
A
(M12 by 70 mm)
27610299
B E18 Torx socket
Start By:
a. Remove the Alternator belt. Refer to Disassembly
and Assembly, "Alternator Belt - Remove and
Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
Note: The weight of the assembly of the crankshaft
pulley, the vibration damper and the crankshaft
adapter is approximately 22 kg (48 lb). Remove the
vibration damper and the crankshaft pulley before the
crankshaft adapter is removed from the engine.
KENR6932
i02654372
Part Description Qty
1
1