Brake System - Segway FUGLEMAN UT10 2022 Owner's Manual

MAINTENANCE,STORAGE AND TRANSPORTATION

BRAKE SYSTEM

The front and rear brakes are hydraulic disc brakes that are
activated by pressing the brake pedal with your foot. These brakes
are self-regulating. As the brake pads wears away, the brake fluid
level will drop. Leakage in the system will also cause the fluid level
to drop.
Brake fluid levels must be checked periodically.
Overfilling of the brake cylinder may cause brake resistance or brake
locking, which may result in serious injury or death.
Keep the brake fluid at the recommended level and do not overfill.
Must check brake disc brake disc wear condition regularly.
The following inspection is recommended to keep the braking
system in good working condition. If the brake is in heavy use
during normal operation, check it frequently.
1. Always keep the brake fluid at an appropriate level. Please
refer to master cylinder/brake fluid section for details (page
129).
2. Check the braking system for liquid any leakage.
3. Check whether the brake travels pedal stroke feels too long or
feels soft.
4. Check whether the friction gasket is worn, damaged or loose.
When replacing the brake gasket, the brake pad must be
replaced when the remaining limit thickness of the brake pad
is not less than 0.04 in (1mm).
5. Check the safety and surface condition of the disc. Use the
recommended brake cleaner to clean any grease. Do not use
spray lubricants or other petroleum-based products. If any
damage (crack, excessive corrosion, warping) is found, please
WARNING
!
128