Segway FUGLEMAN UT10 2022 Owner's Manual page 120

MAINTENANCE,STORAGE AND TRANSPORTATION
Oil drain position 2
The oil drain position 2 is located inside the left cover assembly.
Remove the flange bolt M6×16 and step bolts on the left cover
assembly first, then remove the left cover assembly, and the oil
drain position 2 can be seen.
1. Put the vehicle on the horizontal surface.
2. Start the engine. Let it heat up for two to three minutes at idle.
Hot oil can cause skin burns. Don't let hot oil touch the skin
3. Place a suitable container under the oil drain plug
collect the discharged waste oil
4. Remove the oil drain plug
the waste oil to drain completely
5. Place a suitable container under the oil drain plug
collect the discharged waste oil
6. Remove the oil drain plug
7. Take out the oil filter strainer 5 and clean the oil filter. See
P114 for details
8. Wait for the waste oil in drain position 1 and drain position 2 to
drain completely
Torque
WARNING
!
1
, remove the O-ring and wait for
3
and remove the O-ring
Drain Plug: 11.8-14.8ft·lb. (16~20N.m)
112
1
to
3
to
4