High Beam Adjustment - Segway FUGLEMAN UT10 2022 Owner's Manual

MAINTENANCE,STORAGE AND TRANSPORTATION
1. Unscrew the rear light holder.
2. Turn the bulb that needs to be replaced on the taillight seat
from left to right. When the limit bead at the end of the bulb
gets stuck in the limit slot of the lamp seat, the damaged bulb
can be taken out and replaced with a new bulb with the same
power.
3. Test whether the lamp works normally.

High beam adjustment

The headlight beam can be adjusted slightly up/down. Use the
following procedure to make adjustments.
The following pictures are for reference only. Your model may be
It is best for a Segway Powersports dealer to adjust if conditions permit.
CAUTION
!
slightly different.
144