Front Panel; Ignition Lock/Start Button - Segway FUGLEMAN UT10 2022 Owner's Manual

FRONT PANEL

Ignition Lock/Start Button

MODE1:
Ignition Lock
Turn the key to the position "ON": the vehicle is energized and the
electrical components of the vehicle can be used.
Turn the key to the position "OFF": the whole vehicle circuit is
disconnected and the engine stops. When the switch is in the off
position, the key can be taken out of the switch.
Start Switch
Turn the key to the ignition switch "ON" position, Press the Engine
Start/Stop "
MODE2:
Turn the key to the position "ON": the vehicle is energized and the
electrical components of the vehicle can be used.
Turn the key to the "Start" position without loosening. Wait for 1.5 or 2
seconds before the engine starts(Do not exceed 4 seconds), and the
key will automatically return to the "ON" position.
Turn the key to the position "OFF": the whole vehicle circuit is
disconnected and the engine stops. When the switch is in the off
position, the key can be taken out of the switch.
MODE1
" ，press the start switch, and the vehicle will start.
VEHICLE DEVICE VEHICLE DEVICE
33
MODE2