Segway FUGLEMAN UT10 2022 Owner's Manual page 156

MAINTENANCE,STORAGE AND TRANSPORTATION
1. Remove the 3 fastening bolts
suppressor
2. Remove the muffler spark suppressor.
3. Use a non-synthetic brush to clean the arrester screen.
A synthetic brush may melt if components are warm. If
necessary， blow debris from the screen with compressed air.
4. Inspect the screen for wear and damage. Replace a worn or
damaged screen.
5. Reinstall the muffler spark suppressor and fastening screws.
2
.
148
1
on the muffler spark