Vehicle Activation - Segway FUGLEMAN UT10 2022 Owner's Manual

VEHICLE DEVICE VEHICLE DEVICE

VEHICLE ACTIVATION

This vehicle is equipped with vehicle DTS system for you. DTS is
used to communicate with background system and mobile APP,
so as to obtain vehicle information and control vehicle with mobile
APP. This is an optional system. In order to make you quickly
familiar with and use the system, please read the user's manual
carefully, understand the relevant operation and use information.
The new vehicle must be activated on the APP for the first time if
equipped with vehicle DTS, otherwise the engine will not start.
IOS mobile phone search "Segway powersports" to download
application from "APP STORE" ，Android mobile phone first
download "Google play", and then search "Segway powersports"
to download application in Google Play.
After the successful installation of the APP, the vehicle will be
registered and activated. Firstly, find the VIN code on the vehicle
and register on the APP. The registration procedure is as follows:
1. Power on the vehicle with the mechanical key.
Input or scan vehicle VIN code according to APP registration
prompts, and step on the vehicle brake at the same time. Note:
The vehicle identification code may not be scanned due to the
influence of light. You can try to enter the VIN code manually. The
vehicle VIN code is either on the vehicle frame (see Page 165) or
on the vehicle nameplate (see Page 167).
2. Click the "CONFIRM" button to complete the vehicle binding
operation.
3. Click "START" to start the vehicle.
NOTICE
28