Drying The Cvt - Segway FUGLEMAN UT10 2022 Owner's Manual

3. Insert the handle of the CVT belt replacement tool and pull the
handle outward to open the CVT driven wheel.
4. Remove the drive belt from the CVT driven wheel and driving
wheel.
If there are debris in the engine CVT inner box, please remove all
debris completely.
Install the drive belt
The installation steps are basically the reverse of the removal.
1. Wrap the drive belt around the CVT driving wheel.
2. Use the CVT belt replacement tool to open the CVT driven
pulley,wind the drive belt into the CVT driven pulley.
3. Install the CVT sealing ring and the CVT outer cover, tighten the
CVT outer cover.
Torque

Drying the CVT

In some cases, the water may soak
into the CVT system and must be
dried out it before driving.
MAINTENANCE,STORAGE AND TRANSPORTATION
CVT cover bolt
121
: 4.42ft·lb. ( 6 N.m )