Display Colors - Furuno NAVNET 1734C Operator's Manual

4. VIDEO SOUNDER OPERATION
Activating/deactivating the speed-dependent picture advance mode
1. Press the MENU key followed by the SOUNDER MENU soft key.
2. Select PRR LEVEL.
3. Press the EDIT soft key to open the setting window.
4. Use the Cursor pad to select SPD SENSING PRR.
5. Press the RETURN soft key followed by the MENU key to close the menu.
Note: Use the same speed data sentence (STG or STW) throughout the network for
smooth advancement of the sounder picture. See the paragraph 6.5 for how to output data
through the network.

4.10 Display Colors

You can select the number of colors and background color to display as follows:
1. Press the MENU key.
2. Press the SOUNDER MENU soft key.
3. Select HUE, then press the EDIT soft key to show the hue window.
HUE
1
Hue window
4. Use the Cursor pad to select hue number, referring to the table below. (You can see
the result of your selection on the display.)
Hue No.
1
2
3
4
5
6
7
8
9
5. Press the RETURN soft key followed by the MENU key to close the menu.
4-14
Hue no. and background and echo colors
Echo Color
16 color
8 color
16 color
8 color
16 color
8 color
16 color
8 color
Monochrome yellow, eight intensities
Background Color
Blue
Blue
Dark blue
Dark blue
White
White
Black
Black