Resetting Trip Distance - Furuno NAVNET 1734C Operator's Manual

3.12 Resetting Trip Distance

Trip distance is shown on the navigation data display. You can reset the trip distance to
zero as follows:
1. Press the MENU key.
2. Press the SYSTEM CONFIGURATION and GENERAL SETUP soft keys in that order to
show the GENERAL SETUP menu.
Note: AIS OPTION soft key is currently inoperative.
3. Use the Cursor pad to select RESET TRIP LOG, then press the EDIT soft key.
4. Use the Cursor pad to select YES, then press the ENTER soft key.
5. Press the MENU key to close the menu.
General setup menu, page 1
3. PLOTTER OPERATION
GENERAL
SETUP1
EDIT
NEXT
PAGE
RETURN
3-57