Hot - Furuno NAVNET 1734C Operator's Manual

7.6 Hot Page Setup
Six user-arrangeable hot pages are provided for quick selection of desired display. If the
default hot pages are not to your liking you may change them as shown below.
1. Press the MENU key followed by pressing the SYSTEM CONFIGURATION, SYSTEM
SETUP, HOT PAGE & NAV DISP SETUP and HOT PAGE SETUP soft keys in that
order.
2. Use the Cursor pad to select the hot page number to set, then press the EDIT soft key.
The full-screen selection window appears.
3. Rotate the ENTER knob to select the full-screen picture desired and push the ENTER
knob. A set of combination screens, corresponding to the full-screen selected, appears.
4. Rotate the ENTER knob to select the full screen or combination screen desired and
push it to set.
HOT PAGE 1
RADAR PLOTTER SOUNDER
NAV DATA OVERLAY
Hot page setup menu
HOT PAGE 1
Combination screen selection window
7. CUSTOMIZING YOUR UNIT
- -
- -
10
- -
- -
20
7-23