Function Key Setup - Furuno NAVNET 1734C Operator's Manual

Popup Info You may show the information for objects as below.
(C-Map only) OFF: No information appears.
ALL ON: When the cursor is placed on anywhere
on chart, the information for that location appears.
POINTS ON: When the cursor is placed on an
object symbol, the information for it appears.
QPT/MARK Chooses the function of the uppermost soft key on
Soft Key the plotter display between QUICK POINT and
MARK ENTRY.
QUICK POINT: Enters the quick point at the cursor
or own ship position.
MARK ENTRY: Enters the mark at the cursor or
own ship position.
SHIP SHAPE Chooses configuration for own ship marker.
D. BOX Sets up data boxes. See paragraph 7.5.
(soft key)

7.3.2 Function key setup

The function keys provide one-touch execution of a desired function. The default plotter
function key settings are as shown in the table below.
Function
Default Function
Key
1 Start/stop recording/plotting own ship's track.
2 Edit mark/line.
3 Ruler (measure range and bearing between two points).
4 Add new waypoint.
5 Alphanumeric waypoint list.
If the above settings are not to your liking you may change them as follows:
1. Press the MENU key.
2. Press the FUNCTION KEY SETUP soft key.
Function key
SOFT KEY 1
setting
TRK: TRACK ON/OFF
Function
SOFT KEY 2
key label
EML: EDIT MK/LINE
SOFT KEY 3
RUL: RULER
SOFT KEY 4
ADD: ADD NEW WPT
SOFT KEY 5
ALP: ALPHA LIST
Plotter function key menu
7. CUSTOMIZING YOUR UNIT
(Con't from previous page)
ALL ON, POINTS ON,
OFF
QUICK POINT, MARK
ENTRY
BOAT(L), BOAT(S),
CIRCLE, CROSS
Function Key Label
TRK
EML
RUL
ADD
ALP
FUNC
KEY
EDIT
T
R
K
E
M
L
R
U
L
A
D
D
RETURN
A
L
P
7-11