Furuno GD-1720C Operator's Manual

GD-1720C Operator's Guide
The purpose of this guide is to provide the basic operating procedures for this equipment. For
more detailed information, see the Operator's Manual.
8
9
11
10
Turning the Power On/Off
Turning on the power
Press the POWER/BRILL key momentarily.
Turning off the power
Press and hold down the POWER/BRILL
key until the screen goes off (approx. 3 sec.)
MODEL1724C/1734C
A
1
2
3
4
B
5
6
7
C
(1) Opens/closes the alarm menu.
(2) Clears data; erases selected mark.
(3) Opens/closes the main menu.
(4) Chooses a range.
(5) Displays the soft keys for EBL/VRM.
(6) Radar: Displays the soft keys for
adjustment of gain, A/C SEA, A/C RAIN
and FTC.
Sounder: Adjusts gain.
(7) Long press: Turns power off.
Momentary press: Turns power on.
Opens the display for adjustment of
brilliance, etc. For radar, switches STBY
and TX.
(8) Chooses a display mode.
(9) Momentary press:
Registers own ship's position as a
waypoint.
Press three seconds:
Marks man overboard position.
(10) Shows or hides the soft keys, function
keys, nav data alternately.
(11) Soft keys
(A) Cursor pad
Chooses menu items and options;
shifts cursor. Press, release and press
again to change setting consecutively.
(B) ENTER knob
Push: Registers options on menus.
Rotate: Chooses character; adjusts
sensitivity (sounder, radar); chooses
menu items and options.
(C) Chart slot

Selecting a Display

1. Press the DISP key to open the display
selection window.
2. Rotate the ENTER knob to choose a
basic display screen, and then push it.
3. Rotate the ENTER knob to choose a
combination display.
4. Push the ENTER knob.
1
VX2