Routes; Creating Routes - Furuno NAVNET 1734C Operator's Manual

3.9

Routes

Often a trip from one place to another involves several course changes, requiring a series
of route points (waypoints) which you navigate to, one after another. The sequence of
waypoints leading to the ultimate destination is called a route. Your unit can automatically
advance to the next waypoint on a route, so you do not have to change the destination
waypoint repeatedly.
You can store up to 200 routes, and a route may have 35 waypoints.

3.9.1 Creating routes

Entering a route with existing waypoints
This method constructs routes by using existing waypoints.
1. Press the MENU key.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key to open the ROUTE menu. (No data will be shown if there
are no routes entered.)
Total length of route
Route name
4. Press the NEW ROUTE soft key to open the new route entry screen.
001
LENGTH
WAYPOINTS
25.6 nm 35
002
LENGTH
WAYPOINTS
2
56.7 nm
003
LENGTH
WAYPOINTS
3
21.1 nm
004
LENGTH
WAYPOINTS
3
21.1 nm
PUSH ENTER KNOB TO
SEARCH FOR
---
Route menu
ROUTE NAME
0 0 1
COMMENT
New route entry screen
3. PLOTTER OPERATION
ROUTE
GOTO
NEW
ROUTE
EDIT
ROUTE
Number of waypoints
ERASE
in route
ROUTE
RETURN
NEW
ROUTE
PLOT
LOCAL
LIST
ALPHA
LIST
CONECT
CANCEL
3-35