Customizing Your Unit; General Setup - Furuno NAVNET 1734C Operator's Manual

7. CUSTOMIZING YOUR UNIT

This chapter describes the various options which allow you to set up your unit to suit your
needs. For mode-specific menus, e.g. radar, plotter and sounder, make sure that you select
the appropriate display when making changes or viewing menu options.
7.1

General Setup

This paragraph shows you how to set up functions common to the plotter, radar and
sounder displays. This is done on the GENERAL SETUP menu, which you may display
from any mode. These items include language, key beep, units of measurement, data
sources, etc.
1. Press the MENU key to display the main menu.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the GENERAL SETUP soft key.
KEY BEEP
ON
LANGUAGE
ENGLISH
RANGE UNIT
nm, kt
TEMPERATURE UNIT
°C
DEPTH UNIT
ft
WIND UNIT
kt
SPEED AVERAGING
0060second (s)
LOCAL TIME OFFSET
+00:00
RESET TRIP LOG
NO
TIMEOUT DISPLAY SETTING
15sec
SAVE MOB KEY FUNCTION
SAVE SHIP
POSITION & MOB
WALLPAPER
DEFAULT
Page 1
4. Press the NEXT PAGE or PREV. PAGE soft key to switch pages if necessary.
5. Use the Cursor pad to select item.
6. Press the EDIT soft key.
7. Use the Cursor pad to select option desired, then press the ENTER soft key.
8. Press the MENU key to close the menu.
GENERAL
SETUP 1
EDIT
DST
ON/OFF
NEXT
PAGE
RETURN
General setup menu
LAT/LON DISPLAY
DD° MM.MMM'
TD DISPLAY
LORAN C
SPEED
SOG
POSITION DISPLAY
LAT/LON
TIME DISPLAY
24 HOURS
INFRARED REMOTE MODE
A
RANGE & BEARING MODE
RHUMB LINE
BEARING READOUT
MAGNETIC
MAGNETIC VARIATION
AUTO 7.0° W
AIR PRESSURE UNIT
hPa
Page 2
GENERAL
SETUP 2
EDIT
PREV.
PAGE
7-1