Stopping, Restarting Plotting Of Own Ship Track; Changing Track Color - Furuno NAVNET 1734C Operator's Manual

4. Use the Cursor pad to select one of the following:
ON or OFF (no ARP or AIS): Turn on or off target tracks
ARP ONLY (ARP equipped): Show only ARP tracks.
AIS ONLY (AIS equipped): Show only AIS tracks.
BOTH: Show both ARP and AIS tracks.
5. Press the ENTER soft key.
6. Press the MENU key to close the menu.

3.6.2 Stopping, restarting plotting of own ship track

When your boat is at anchor or returning to port you probably won't need to record its track.
You can stop recording the track, to conserve the track memory, as follows:
1. Press the MENU key followed by the CHART SETUP and TRACKS & MARKS
CONTROL soft keys to open the TRACK CONTROL menu.
OWN SHIP TRACK DISP
ON
OWN SHIP TRACK COLOR
RED
TARGET TRACK DISPLAY
OFF
TARGET TRACK COLOR
WHITE
INTERVAL
TIME
TIME INTERVAL
00m10s
DISTANCE INTERVAL
00.10nm
MEMORY(TRACK & MARK)
2000POINTS
(MARK MEMORY)
(6000)POINTS
TRACKING
2. Press the TRACK RESUME soft key. The soft key now shows "TRACK HALT" and the
indication "TRACKING" in the SHIP'S TRACK STATUS window changes to "NOT
TRACKING." In addition, the icon "H" is displayed at the top of the plotter display and
own ship marker becomes a hollow circle. To restart plotting the track, press the TRACK
HALT soft key
3. Press the MENU key to close the menu.

3.6.3 Changing track color

Track can be displayed in red (default setting), yellow, green, light-blue, purple, blue and
white. It can be useful to change track color on a regular basis to discriminate between
previous day's track, etc.
TRACK
CONTROL
EDIT
TRACK
RESUME
TRACK
RESUME
ERASE
T & M
TRACK
HALT
MARK
SETUP
RETURN
Track control menu
3. PLOTTER OPERATION
OWN SHIP TRACK DISP
ON
OWN SHIP TRACK COLOR
RED
TARGET TRACK DISPLAY
OFF
TARGET TRACK COLOR
WHITE
INTERVAL
TIME
TIME INTERVAL
00m10s
DISTANCE INTERVAL
00.10nm
MEMORY(TRACK & MARK)
2000POINTS
(MARK MEMORY)
(6000)POINTS
NOT TRACKING
TRACK
CONTROL
EDIT
TRACK
HALT
ERASE
T & M
MARK
SETUP
RETURN
3-19