Changing Waypoint Mark Size (Navionics Gold) - Furuno NAVNET 1734C Operator's Manual

3.8.4 Changing waypoint mark size (Navionics GOLD)

You may change the size of all waypoint marks to small or large (default), or you may turn
them off.
1. Press the MENU key to open the menu.
2. Press the CHART SETUP and CHART CONFIGURATION soft keys.
3. Use the Cursor pad to select WAYPOINTS.
4. Press the EDIT soft key.
5. Use the Cursor pad to select LARGE, SMALL or OFF.
LARGE: Shows mark in actual shape.
SMALL: Displays all waypoints with an "X" regardless of mark shape selected.
OFF: Turns off all waypoints and their names. Waypoints currently used in navigation
are shown regardless of this setting.
6. Press the ENTER soft key.
7. Press the MENU key to close the menu.
LAT LON GRID
GREEN
TEXT INFORMATION
ON
WAYPOINTS
LARGE
WAYPOINT NAMES
ON
CHART BORDER LINES
ON
LANDMASS*
BRT YELLOW
NAVAIDS*
ON
LIGHT SECTOR INFO
ON
OTHER SYMBOLS*
WHITE
Chart details menu
3. PLOTTER OPERATION
CHART
CONFIG
EDIT
CNTOUR
LINE
NEXT
PAGE
RETURN
*: Not used.
3-33