Remote Controller - Furuno NAVNET 1734C Operator's Manual

1.1.2 Remote controller

Key
RANGE Same as RANGE key on
display unit.
DISP Same as DISP key on
display unit.
SAVE MOB Same as SAVE/MOB key on
display unit.
Ten keys Enter alphanumerics.
EBL/VRM Same as EBL/VRM key on
display unit.
GAIN Same as GAIN key on
display unit.
WPT Displays "alphabet" WPT list
on plotter display.
MARK ENT Same as MARK ENTRY soft
key.
CENTER Returns own ship to screen
center on plotter display.
CNTL Switches control between
displays on combination
displays.
Operating distance
90 : Up to 5 m
45 : Up to 3 m
Replace the batteries (AA) when the
distance from which the display
unit can be operated shortens.
Note: The remote controller may
become damaged if dropped.
Mishandling of the remote
controller is not covered by
the warranty.
Remote controller
Function
ENT
CLEAR
MENU
BRILL
TONE
TX/STBY
ACQ
ALARM
HIDE/SHOW
SK1 – SK5
(soft keys)
1. OPERATIONAL OVERVIEW
Key Function
Same as ENTER knob on
display unit.
Same as CLEAR key on
display unit.
Same as MENU key on
display unit.
Adjusts display brilliance.
Not used.
Toggles radar between
standby and transmit.
Acquires radar target.
(Requires radar source
equipped with ARP.)
Same as ALARM key on the
display unit.
Same as HIDE/SHOW key
on display unit.
Same as soft keys on display
unit.
.
1-3