Nav Graphic Display - Furuno NAVNET 1734C Operator's Manual

3.1.2 Nav graphic display

The nav graphic display shows the compass display or the wind display depending on the
setting of GRAPHIC METER in the NAV GRAPHIC DISPLAY SETUP menu. For further
details see paragraph 7.10.
Compass display
The compass display, shown in combination displays, provides steering information. The
compass rose shows two triangles: the red triangle shows own ship's course and the black
triangle, which moves with ship's course, shows the bearing to destination waypoint.
The water temperature and depth graphs, which require appropriate sensors, show the
latest 10 minutes of water temperature and depth data. The range of the depth graph is 50
feet and it is automatically adjusted with depth. You may adjust the update interval for these
graphs on the NAV GRAPHIC DISPLAY SETUP menu.
Time-to-go
to destination
Destination
waypoint bearing
(black and filled
on color model,
hollow on mono-
chrome model)
Depth
graph*
* = Requires appropriate
sensor.
Destination
Speed over ground
waypoint
003WPT
SOG 10.0
TTG 0D 9H 59M
DPT
3 5 9 . 9 M
4 5 . 2 f t
0
50 3 5 9 . 9 M
Shown (in red on
color model) when
direction to steer
is "left."
Bearing scale
Compass display
Range to destination waypoint
Speed through water
RNG 9 9 . 9 n m
STW 10.0
kt kt
23th23:59
ETA
BRG
TMP
1 6 . 2 F
20
CSE
10
Direction to steer
(green on color model)
Own ship marker
(For color model, black when within XTE range,
yellow when over; flashes when over XTE range
on monochrome model)
XTE monitor (See next page for description.)
3. PLOTTER OPERATION
Estimated time of
arrival at destination
Ship's course
(red and filled on
color model, filled
on monochrome model )
Water
temperature
graph*
3-3