Waypoint Mark Size; Changing Waypoint Position On The Plotter Display; Searching Waypoints - Furuno GP-1850F Operator's Manual

6.4 Waypoint Mark Size

You may change the size of all waypoint
marks to small or large (default), or turn them
off.
1. Press the [MENU] key to open the main
menu.
2. Press the soft key CHART SETUP OP-
TIONS.
3. Press the soft key CHART DETAILS to
open the CHART DETAILS menu.
LAT/LON GRID GREEN
s
TEXT INFO ON
WAYPOINT LARGE
WAYPOINT NAME ON
INDEX ON
LANDMASS BRT YELLOW
BACKGROUND BLUE
NAV AIDS ON
SECTOR INFO OFF
OTHER SYMBOLS WHITE
MARK SIZE STD
DGPS 3D
Figure 6-11 Chart details menu
4. Press or to select WAYPOINT.
5. Press the soft key EDIT.
6. Press or to select LARGE, SMALL
or OFF. LARGE shows mark in actual
shape. SMALL displays all waypoints with
an "X" regardless of mark shape selected.
7. Press the soft key ENTER or [ENTER]
key.
6.5 Changing Waypoint
Position on the Plotter
Display
You may change the latitude and longitude
position of waypoints on the plotter display
as follows:
1. Press the [WPT/RTE] key followed by the
soft key WAYPOINTS to open the
waypoint menu.
2. Press the soft key WAYPOINT BY CUR-
SOR. The plotter display appears.
3. Operate the cursor pad to place the cur-
sor on the waypoint which you want to
change. A flashing diamond mark appears
on the waypoint when it is correctly se-
lected.
4. Press the soft key EDIT/MOVE.
5. Press the soft key MOVE WPT.
6. Operate the cursor pad to place the cur-
sor on the location desired.
7. Press the [ENTER] key.
The waypoint moves to the cursor position
and its new position is recorded on the
CHART
waypoint list. If the waypoint is set as desti-
DETAIL
nation or is part of a route, you are asked if
EDIT
you are sure to move the waypoint. In this
case, press the [ENTER] key again, or the
DEPTH
INFO
[CLEAR] key to cancel move.

6.6 Searching Waypoints

RETURN
You can search for a waypoint through the
alpha/numeric list as follows:
1. Press the [WPT/RTE] key, and then press
the soft keys WAYPOINTS and ALPHA/
NUMERIC LIST to show the alpha/nu-
meric list. At the bottom of the display the
search window appears.
2. Use the alphanumeric keys to enter the
first 1 - 3 characters in the search win-
dow. The waypoint searched appears at
the top of the screen.
SEARCH FOR _ _ _
Figure 6-12 Search window
6-5