Changing Mark Size; Erasing Marks - Furuno GP1650 Series Operator's Manual Addendum

3 Changing Mark Size

Mark size can be selected from STD (stan-
dard) and SMALL.
1. Press the [MENU] key to display the main
menu.
2. Press the soft key CHART SETUP OP-
TIONS.
3. Press the soft key CHART DETAIL to
open the CHART DETAIL menu.
LAT/LON GRID GREEN
s
TEXT INFO ON
WAYPOINT LARGE
WAYPOINT NAME ON
INDEX ON
LANDMASS BRT YELLOW
BACKGROUND BLUE
NAV AIDS ON
SECTOR INFO OFF
OTHER SYMBOLS WHITE
MARK SIZE STD
DGPS 3D
CHART DETAIL menu
4. Press to select MARK SIZE.
5 Press the soft key EDIT.
6. Press or to select STD (standard) or
SMALL.
7. Press the [ENTER] key.
7

4 Erasing Marks

Erasing individual marks/lines
1. Operate the cursor pad to place the cur-
sor on the mark you want to erase.
2. Press the [CLEAR] key. The mark se-
lected is erased.
Note: To erase a line, place the cursor
on the edge of the line. The line segment
will be erased.
CHART
DETAIL
Erasing whole marks/lines
EDIT
CNTOUR
You can erase all marks and lines. Be abso-
LINE
lutely sure you want to erase all marks and
lines; erased marks and lines cannot be re-
stored.
1. Press the [MENU] key followed by the soft
keys CHART SETUP OPTIONS and
RETURN
TRACK CONTROL.
2. Press the soft key ERASE MARK. You
are asked if you are sure to erase all
marks and lines.
3. Press the [ENTER] key to erase, or press
the [CLEAR] key to escape.
5 Displaying Track and
Number of track and mark points used ap-
pears in the TRACK STATUS window on the
TRACK CONTROL display. For further de-
tails see TRACK CONTROL WINDOW.
Mark Points