Erasing Individual Waypoints; Changing Waypoint Data - Furuno GP-1650 Operator's Manual

FISH01
ABCDEFGHIJKL
135 23.456' W
WPT001
12:30 29SE97
ABCDEF
15:21 01OCT97
BRIDGE
16:45 01OCT97
DGPS 3D
Figure 5-9 Local list
ABCDEF
15:21 01OCT97
BRIDGE
16:45 01OCT97
FISH01
ABCDEFGHIJKL
WPT001
12:30 29SE97
DGPS 3D
SEARCH FOR
Figure 5-10 Alpha/numeric list
4. Press the soft key NEW WPT to show the
waypoint window. Own ship's position is
shown. Change the data similar to how
you did in "Entering waypoints by the cur-
sor."
5. Press the soft key SAVE.
5.2 Erasing Individual
Waypoints
Individual waypoints can be erased by the
cursor or through the waypoint list.
Erasing waypoints by the cursor
1. Press the cursor pad to turn on the cur-
sor.
2. Operate the cursor pad to place the cur-
sor on the waypoint you want to erase. A
flashing diamond mark appears over the
waypoint when it is correctly selected.
5-4
WPT
BRG. 23.8
LOCAL
RNG. 1.75nm
33 12.345' N
GO TO
BRG. 90.0
RNG. 2.51nm
NEW
33 23.456' N
WPT
135 23.567' W
EDIT
BRG. 180.0
RNG. 5.07nm
WPT
34 12.345' N
135 54.321' W
ERASE
BRG. 359.9
WPT
RNG. 8.01nm
34 12.345' N
135 54.321' W
RETURN
WPT
BRG. 180.0
ALPHA
RNG. 5.07nm
34 12.345' N
135 54.321' W
GO TO
BRG. 359.9
RNG. 8.01nm
NEW
34 12.345' N
WPT
135 54.321' W
EDIT
BRG. 23.8
RNG. 1.75nm
WPT
33 12.345' N
135 23.456' W
ERASE
BRG. 90.0 WPT
RNG. 2.51nm
33 23.456' N
135 23.567' W
RETURN
_ _ _
Search window
3. Press the [CLEAR] key. You are asked if
you are sure to erase the waypoint.
4. Press the [ENTER] key. The waypoint is
erased from both the plotter screen and
the waypoint list.
Erasing waypoints through the
waypoint list
1. Press the [WPT/RTE] key to open the
waypoint & route menu.
2. Press the soft key WAYPOINTS to open
the waypoint menu.
3. Press the soft key LOCAL LIST or ALPHA/
NUMERIC LIST.
4. Press or to select the waypoint you
want to erase.
5. Press the soft key ERASE WPT. You are
asked if you are sure to erase the
waypoint.
6. Press the [ENTER] key. The waypoint is
erased from both the waypoint list and the
plotter screen.

5.3 Changing Waypoint Data

You can change the waypoint data through
the list.
1. Press the [WPT/RTE] key, soft key
WAYPOINTS, and soft key LOCAL LIST
or ALPHA/NUMERIC LIST.
2. Press or to select the waypoint you
want to change.
3. Press the soft key EDIT WPT.
4. Change data as you did in "Entering
waypoints by the cursor."
5. Press the soft key SAVE.