Settings - Samsung NV73N9770RM User & Installation Manual

Operations

Settings

You may want to change the default settings to your preference, or to check the
network connection for diagnosis. The oven offers you with 11 different setting
items.
Wi-Fi
Turn on or off a Wi-Fi connection.
To enable a Wi-Fi connection
Access Menu > Settings > Wi-Fi, and then tap On in the right pane.
1.
2. Tap an item in the list that appears, which lists available Wi-Fi networks.
3. You will be prompted to provide a password for a secure network.
Enter the password.
NOTE
ꞏ
To disable a Wi-Fi connection, access Menu > Settings > Wi-Fi, and then tap Off
in the right pane.
ꞏ For details about the Wi-Fi connection and using the App, see the user manual
of the App.
Easy connection
Easy connection enables you to easily configure the network settings including the
authentication procedure.
Smart control
With Smart Control enabled during cooking, you can change the cooking time and/
or temperature using the App.
For more information, see the application manual that is provided separately.
Smart
Favourites Cleaning Timer
Control
26 English
NV73N9770RM_EE_DG68-00613L_SV+NO+FI+DA+EN.indb 26 NV73N9770RM_EE_DG68-00613L_SV+NO+FI+DA+EN.indb 26
Access Menu > Smart Control, and turn it on
or off with ease.
NOTE
Hereby, Samsung Electronics, declares that this oven is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com,
go to Support.
The equipment may be operated in all EU countries.
Language
Choose a display language.
ꞏ
Access Menu > Settings, and then tap a preferred language.
Volume
Adjust the volume level for beeps and melodies.
ꞏ
Access Menu > Settings, and then use the bar next to Volume to adjust the
volume.
Brightness
Change the brightness of the display screen.
ꞏ Access Menu > Settings, and then use the bar next to Brightness to adjust the
screen brightness.
Display
The oven enters Standby mode after a certain time of inactivity, which displays the
current time. You can enable or disable the clock screen that appears in Standby
mode.
ꞏ
Access Menu > Settings, and then tap Display to toggle between On and Off.
ꞏ
To save power, the current time also disappears after a certain time of inactivity
even if you set Display to On.
Clock type
Select a clock type of the current time that appears in Standby mode. Two types
are available, Analogue and Digital.
ꞏ
Access Menu > Settings, and then tap Clock type to toggle between Analog and
Digital.
2021-06-08 오후 3:58:18 2021-06-08 오후 3:58:18