Before You Start; Initial Settings; New Oven Smell; Smart Safety Mechanism - Samsung NV68A1170 Series User & Installation Manual

Hide thumbs Also See for NV68A1170 Series:
Table of Contents

Advertisement

Available languages

Available languages

Installation
After installation is complete, remove the protective film, tape, and other packing
material, and take out the provided accessories from inside the oven. To remove
the oven from the cabinet, disconnect power to the oven first, and then remove
2 screws on both sides of the oven.
WARNING
The oven requires ventilation for normal operation. Do not block the vents under
any circumstance.
NOTE
The actual appearance of the oven may differ with the model.
10 English
NV68A1170BS_OL_DG68-01366H-01_EN.indd 10
NV68A1170BS_OL_DG68-01366H-01_EN.indd 10
Fit the oven into the cabinet and fix the
oven firmly on both sides using 2 screws.

Before you start

Initial settings

When you power on the oven for the first time, the default time of "12:00" appears
on the display where the hour element ("12") blinks. Follow the steps below to set
the current time.
1. With the hour element blinking, turn the
2. With the minute element blinking, turn
To change the current time after this
initial setting, hold down the
3 seconds and follow the above steps.

New oven smell

Before using the oven for the first time, clean inside the oven to remove the new
oven smell.
1. Remove all accessories from inside the oven.
2. Run the oven with Convection 200 °C or Conventional 200 °C for an hour. This
will burn any remaining production substances in the oven.
3. When complete, turn off the oven.

Smart safety mechanism

If you open the door while the oven is operating, the oven light turns on and
both the fan and the heating elements stop operation. This is to prevent physical
injuries such as burns as well as to prevent unnecessary energy loss. When this
happens, simply close the door and the oven continues to operate normally
because this is not a system failure.
value dial (right-sided dial) to set the
hour, and then press OK to move to the
minute element.
the value dial to set the minute, and then
press OK.
button for
2022-09-08 오후 2:58:10
2022-09-08 오후 2:58:10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv68a1172 series

Table of Contents