AMD Xilinx ZCU670 User Manual page 46

OUT7: Unused
○
OUT8: 10 MHz
○
Enabled, LVCMOS (J147)
○
OUT9: Unused
○
Programmable User SI570 Clocks
[Figure 2, callouts 4, 11, and 12]
The ZCU670 board has three I2C programmable SI570 low-jitter 3.3V LVDS differential
oscillators, one assigned to the DDR4 component memory interface bank (Bank 65 I/F C0: U47),
one assigned to the PS reference clock (Bank 503 U1.M25 PS_REF_CLK), and one assigned to
GTY131 (U48).
On power-up, the user clocks default to a pre-programmed output frequency: DDR4 I/F U47 to
300.000 MHz, PS_REF_CLK U130 to 33.333333...MHz (33 + 1/3 MHz), and GTY I/F U48 to
156.250 MHz.
User applications can change the output frequency of each SI570 within the range of 10 MHz to
810 MHz through the I2C1 bus interface. Power cycling the ZCU670 board reverts user clocks to
their default settings.
These oscillators can also be reprogrammed from MSP430 system controller U38 (see TI
MSP430 System Controller on the
information and the
Tutorial (XTP698).
DDR4 memory interface C0 (U47) SI570:
• Programmable oscillator: Skyworks Solutions, Inc. (SiLabs) 570BAB001614DG (10 MHz-810
MHz, 300 MHz default)
• I2C 0x5D
• LVDS differential output
• Total stability: 61.5 ppm
PS reference clock (U130) SI570:
• Programmable oscillator: Skyworks Solutions, Inc. (SiLabs) SI570JAC000900DGR (10
MHz-160 MHz, 33.333333...MHz (33 + 1/3 MHz) default)
• I2C 0x5D
• LVCMOS single-ended output
• Total stability: 61.5 ppm
UG1532 (v1.0) March 30, 2022
ZCU670 Board User Guide
Texas Instruments
ZCU670 Evaluation Board website
Chapter 3: Board Component Descriptions
website for more system controller
for the ZCU670 System Controller GUI
Send Feedback
www.xilinx.com
46