Digital Projection
M-Vision Cine 320 Series
Editing projector settings
Most settings are changed by selecting from a list.
•
Select from the list using the
LEFT
buttons.
The change will be made immediately.
Some submenus mark the current selection with a
cross
(Fig. 1). To change the selection:
1.
Use
UP
and
DOWN
to highlight the item you wish to
select.
2.
Press
to clear the current selection
ENTER/SELECT
and select the highlighted item.
Sliders
1.
Activate a slider (Fig. 2) by pressing
2.
Adjust the value using the
LEFT
buttons.
3.
Accept the change and close the slider by pressing
MENU
or
ENTER/SELECT
.
Commands
To execute a command,
•
Highlight the command and then press
SELECT
.
Sometimes you will be asked for confirmation (Fig. 3).
Select
Yes
or
No
using the
LEFT
and
buttons, then press
ENTER/SELECT
choice.
Rev D July 2014
and
arrow
RIGHT
LEFT
or
RIGHT
.
and
arrow
RIGHT
ENTER/
RIGHT
arrow
to confirm your
USING THE MENUS
Fig. 1 Selection marked with a cross
Fig. 2 Slider
Fig. 3 Confirmation dialog
Operating Guide
Notes
28