Table of Contents
Advertisement
Digital Projection M-Vision Laser 18K Series
Editing projector settings
If the highlighted menu item contains a list of values to choose from, you can change the
value by doing the following:
1.
Highlight the menu item and press
2.
In the list of values that opens, use the
ENTER/OK
highlight a value, then press
Using a slider to set a value
Some parameters open a slider. To set such a parameter:
1.
Press the
LEFT
or
RIGHT
arrow button, or
The arrow buttons will open the slider and adjust the value at the same time.
ENTER/OK
will open the slider without altering the initial value.
LEFT
RIGHT
2.
Use the
and
arrow buttons to move the slider.
3.
When ready, press
EXIT
to exit the slider and return to the menu, or press
exit the slider without showing the menu again.
Editing numeric values
Some parameters take numeric values without using sliders - for example, color matching
values or IP addresses.
1.
Use the
UP
and
DOWN
arrow buttons to highlight the row containing the
numeric fi eld you wish to edit.
ENTER/OK
2.
Press
to enter edit mode. A numeric fi eld in edit mode is white text on
blue background.
3.
In edit mode:
•
Use the
UP
arrow button to increase the numeric value.
•
DOWN
Use the
arrow button to decrease the numeric value.
LEFT
RIGHT
4.
Use the
and
arrow buttons to edit the next or previous numeric
fi elds within the same row.
ENTER/OK
5.
Once ready, press
to exit edit mode.
Operating Guide
ENTER/OK
.
UP
DOWN
and
arrow buttons to
again to select the highlighted value.
ENTER/OK
.
USING THE MENUS
Menu Name
Highlighted Item
Menu Item
Menu Item
List of values
Parameter
MENU
to
Slider
Data
Row
Highlighted Row
Row
Row
Numeric values
Current Value
Highlighted Value
Value
Some menu items may be
Value
unavailable due to settings in other
Value
menus. Unavailable menu items
appear gray.
Value
x: 0.658
y: 0.339
x:
0.315
y: 0.662
x: 0.146
y: 0.043
x: 0.276
y: 0.283
Notes
Rev D October 2019
page 37
Hide quick links:
Advertisement
Table of Contents
