Table of Contents
Advertisement
Editing projector settings
If the highlighted menu item contains a list of values to choose from, you can change the value by doing the
following:
1. Highlight the menu item and press ENTER/OK.
2. In the list of values that opens, use the UP and DOWN arrow buttons to highlight a value, then press
ENTER/OK again to select the highlighted value.
Using a slider to set a value
Some parameters open a slider. To set such a parameter:
1. Press the LEFT or RIGHT arrow button, or ENTER/OK. The arrow buttons will open the slider and adjust
the value at the same time. ENTER/OK will open the slider without altering the initial value.
2. Use the LEFT and RIGHT arrow buttons to move the slider.
3. When ready, press EXIT to exit the slider and return to the menu, or press MENU to exit the slider without showing the menu again.
Operating Guide
Using the menus
Menu Name
Highlighted Item
Menu Item
Menu Item
List of Values
Parameter
Digital Projection Ltd. Titan Laser WUXGA
Some menu items may be
unavailable due to
Current Value
settings in other menus.
Highlighted Value
Unavailable menu items
appear gray
Value
Value
Value
Value
Slider
Notes
Rev B September 2019
page 47
Advertisement
Table of Contents
