Table of Contents
Advertisement
400 Brake system
Parking brake control
Parking brake control
1. Parking brake lever
2. Parking brake lever bottom switch
3. Parking brake lever intermediate switch
Outline
The parking brake is built in transfer (5). On
q
this mechanical parking brake, operating the
multi-disc brake lever (6) from parking brake
lever (1) allows "applying" or "releasing" the
parking brake.
Pulling parking brake lever (1) on the opera-
q
tor's seat pulls up the multi-disc brake lever
(6), which is connected with control cable (4),
"applying" the parking brake.
Returning parking brake lever (1) to its original
q
position pushes down the multi-disc brake
lever (6), which is connected with control cable
(4), "releasing" the parking brake.
As long as the parking brake is "applied", cur-
q
rent to the directional solenoid valve on the
HST pump is cut off and the swash plate of the
HST pump is maintained at the neutral posi-
tion.
WA250, 250PZ-6
4. Control cable
5. Transfer
6. Multi-disc brake lever
SEN03828-00
1
21
10-400
Advertisement
Chapters
Table of Contents
Troubleshooting
