Parking The Shovel - Komatsu 06253 Operation & Maintenance Manual

3.15 PARKING THE SHOVEL

3.15 PARKING THE SHOVEL

Park the machine at a safe place on level and solid ground.
Lower the working attachment onto the ground in a position
as shown on the oil level plate at the hydraulic oil reservoir.
Stop the engine and relieve the pressure in the hydraulic sys-
tem, see "STOPPING THE ENGINE" on page 202 for more
information.
Move the lock lever fully to the rear in locked position.
DO NOT leave the Operator's Cab when the engine is run-
ning.
Be sure to lock the operator's cab door before leaving the
Shovel.
If the Shovel has to be parked on steep terrain, the track
groups must be secured with wedges.
Before leaving the Shovel make sure that the parked machine
does not impair local requirements, have consideration for
other mining traffic.
CLEANING THE TRACK GROUPS
Under working conditions with excessive material build up on the
crawler components, cleaning of the crawlers is very important to
prevent damage.
Material build up on guide wheels, drive sprockets and tracks can
lead to over tensioning of the tracks, resulting in severe damage
to these components.
If there is danger of frost, the tracks must also be cleaned.
NOTICE
Use a suitable cleaning device for removing dirt, mud and
debris from the tracks, rollers, guide wheels and sprockets.
200
WARNING
OPERATION