200 Power train
Clutch solenoid valve
Clutch solenoid valve
P: From HST charge pump
A: To transfer clutch
T: To drain
1. Clutch solenoid valve
2. Plunger
3. Coil
4. Push pin
5. Spring
6. Spool
7. Body
WA250, 250PZ-6
Operation
When the current value of input signal is large,
q
the transfer clutch drains oil pressure.
As the current value of input signal becomes
q
smaller, oil pressure of the transfer clutch goes
higher inversely proportional to the current
value.
If the current value of input signal is further
q
lowered until the oil pressure of the transfer
clutch reaches the oil pressure at which oil is
pressure-fed from the HST charge pump, the
oil pressure of the transfer clutch remains at
this level even if the current value may be fur-
ther decreased.
SEN03826-00
1
33
10-200