2N IP Verso Installation Manual page 177


Note
• The time interval between the short press of RESET and reconnection after restart
is 26 s for 2N
Available Switches
Location
Main Unit
I/O Module*
(Part No. 9155034)
More modules marked by * can be used.

Security
• The 12V output is used for lock connection. If, however, the unit (2N IP Intercom,
2N Access Unit) is installed where unauthorized tampering may happen, we
strongly recommend that the 2N
enhanced installation security.
®
IP Verso.
Name
Relay 1
Output 1
ext.relay1
ext.relay2
Installation manual 2N® IP Verso
Description
Passive switch: NO/NC contact, up to 30
V / 1 A AC/DC. Used for connection of non-
critical devices only (lights, e.g.).
Active switch output: 8 up to 12 V
DC depending on power supply (PoE: 10 V;
adaptor: power supply voltage minus 2 V),
max 400 mA
Passive relay switch: NO and NC contacts,
up to 30 V / 1 A AC/DC. Used for connection
of non-critical devices only (lights, e.g.).
Passive relay switch: NO and NC contacts,
up to 30 V / 1 A AC/DC. Used for connection
of non-critical devices only (lights, e.g.).
®
Security Relay (Part No. 9159010) be used for
177 / 241