via this two-wire cable and so can be added to an existing installation. Thanks to its compact
dimensions, the device can be installed into a standard mounting box.
Connection:
®
Connect the 2N
Security Relay to the intercom as follows:
•
To the intercom active output (OUT1)
Connect the electric lock to the 2N
•
To the switched output.
•
To the passive output in series with the external power supply.
The device also supports a Departure button connected between the 'PB' and '- Helios IP /
intercom' terminals. Press the Departure button to activate the output for 5 seconds.
Status signalling:
Green LED
flashing
on
flashing
on
®
Security Relay output as follows:
Red LED
off
off
flashing
flashing
Installation manual 2N® IP Verso
Status
Operational mode
Activated output
Programming mode – waiting for
initialisation
Error – wrong code received
205 / 241