Touch Keypad & RFID Reader 125kHz, 13.56MHz, NFC
The Touch keypad with a combined 125 kHz and 13.56 MHz card reader (Part No. 9155081) is
®
one of the 2N
IP Verso intercom elements and is used for code/card access control, making
user calls and/or other functions. The keypad surface is very sensitive yet weatherproof at the
same time.
•
NFC – a licensed function, for 2N
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
•
125 kHz
•
EM4xxx
•
13.56 MHz
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
®
•
2N
Mobile Key
Tip
•
To accelerate card reading, you are recommended to select the card types used by
the user in the module settings.
®
Mobile Key for Android only.
®
IP Verso bus connectors.
Installation manual 2N® IP Verso
192 / 241