Keypad
The Keypad (Part No. 9155031) is one of the 2N
numerical input in the system.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
Touch Keypad
The Touch keypad (Part No. 9155047) is one of the 2N
provides a numerical input in the system.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
RFID Card Reader Module 125 kHz
The 125 kHz RFID card reader (Part No. 9155032) is one of the 2N
and is used for reading RFID card Ids in the 125 kHz band.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
•
EM4xxx
Caution
•
To increase the reader's reading distance in combination with a touch display in a
single installation, we recommend you to pull the M-Bus and LAN cables through
separate bushings to avoid their crossing.
®
IP Verso intercom elements and provides a
®
IP Verso bus connectors.
®
IP Verso bus connectors.
®
IP Verso bus connectors.
Installation manual 2N® IP Verso
®
IP Verso intercom elements and
®
IP Verso intercom elements
187 / 241