Technical specification:
•
Resolution: 320 px x 214 px H x V
•
Resolution slideshow: 214 px x 214 px
•
Contrast ratio: 400
•
Brightness: 350 cd/m2
•
Weight: 280 g
•
Working temperature: −20 °C – 60 °C
•
Resistance level: IK07
Induction Loop
The Induction loop (Part No. 9155041) is one of the 2N
used to transmit an audio signal directly into a hearing aid via a magnetic field.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
•
Used mode: Telecoil (also referred to as t-switch or t-coil)
•
Maximum power: 2W
•
Frequency range: 100 Hz – 5 kHz / ± 3 dB
•
External antenna can be connected – Part No. 9155043
•
Short circuit resistance: without limitation
®
IP Verso bus connectors.
Installation manual 2N® IP Verso
®
IP Verso intercom elements and is
195 / 241