Install Fittings On The Autoboom Valve; Mount The Autoboom Valve - Raven AutoBoom Installation Manual

5. Use the Allen wrench to reinstall the port plugs on Ports 3A and 3B of the AutoBoom valve.
FIGURE 6. Coil Reinstalled on the AutoBoom Valve
6. Reinstall the coils on the solenoids of the AutoBoom valve.

INSTALL FITTINGS ON THE AUTOBOOM VALVE

Before mounting the AutoBoom valve on the machine, install the proper fittings on the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following
figure and table to install the fittings in the appropriate ports of the AutoBoom valve.
Fitting - 9/16" JIC (M) to 9/16" SAE O-Ring (M) Straight Adapter
Fitting - 3/4" JIC (M) to 3/4" SAE O-Ring (M) Straight Adapter
Fitting - 9/16" SAE O-Ring Internal Hex Plug
Fitting - 9/16" JIC (M) to 3/4" SAE O-Ring (M) Straight Adapter

MOUNT THE AUTOBOOM VALVE

FIGURE 7. AutoBoom Valve Mounted on the Mounting Bracket
P/N 016-0230-110 Rev. D
Fitting
POWERGLIDE PLUS
Part Number Port
333-0012-045 LC, RC
333-0012-093 P, T
333-0012-104 LV, RV
LF CYL RTN,
333-0012-046
RT CYL RTN
17