Raven AutoBoom Installation Manual page 54

C 4
HAPTER
Mount the Gauge Wheels
NOTE: The appearance of the wheel axles may vary.
1. Remove the nuts from the right wheel axle (P/N 063-0130-585)
2. Place the wheel (P/N 322-0131-003) on the right wheel axle.
3. Align and place the hub retainer bracket (P/N 107-0171-617) over the wheel.
4. Reinstall the lug nuts on the wheel axle to secure the wheel.
FIGURE 21. Gauge Wheel Mounting Bracket Installed
5. Secure the wheel mounting bracket (P/N 116-0159-707) to the front of the right boom using four 1-5/16" W x 2"
L x 3/8" thread U-bolts (P/N 107-0171-612) and eight 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
FIGURE 22. Gauge Wheel Installed
50
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
Buhler Versatile SX280 AutoBoom® Installation Manual