CHAPTER
3
FOR AUTOGUIDE MACHINES
INSTALL THE RS1™
1. Assemble the latch, plug, rubber washer, and latch nut through the latch hole on RS1 mounting plate.
FIGURE 1. Latch Assembly
2. Mount the RS1 base plate to the RS1 unit using the four bolts provided. Ensure the mounting tabs are to the
right and the latch is to the left.
FIGURE 2. Mount RS1 Unit to Mounting Bracket
Mounting Tabs
Installation: For AutoGuide Machines
I NSTALLATION
C H A P T E R 3
Front of RS1
Unit
RS1 Mounting Plate
Latch
Plug
Latch Hole
Rubber Washer
Latch Nut
Mounting Latch
11